Detalle Productos Cat
16009044
15707402
623 Wheel Tractor-Scraper
Caterpillar
Metric
Imperial
Flywheel Power - Tractor/Scraper
304 kW (407 hp)
Scraper Capacity - Heaped
17.6 m³
23 yd³
Top Speed - Loaded
53.9 km/h
33.5 mile/h
Availability
Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.
Increased Comfort
Ergonomic controls and a newly redesigned cab interior provide a more comfortable and efficient working environment all day longUp To 7% More Elevator Torque
A stronger elevator structure reduces chain wear and improves available torqueAdditional Safety
New safety features help operators be more productive and work more efficiently all day longBE MORE PRODUCTIVE
WORK IN COMFORT
DESIGNED FOR SAFETY
EASY TO OPERATE
INTEGRATED CAT TECHNOLOGIES
EXECUTE EFFICIENCY
- Up to 7% additional elevator torque.
- Up to 50% improvement in chain life.
- Enhanced elevator drive sprocket for reduced chain wear.Improved scissor-style chain tension system for decreased
sprocket wear, chain wear, and chain jumping. - Cat C13 engine offers increased power density with a combination
of proven electronic, fuel, and air systems. - Use Ground Speed Control to set the desired top speed, and the
machine will find the gear that works best for the engine and the
transmission, providing a lower fuel burn.
• The Machine Speed Limit feature replaces Top Gear Selection. - Advanced Productivity Electronic Control System (APECS) allows
the engine and transmission to communicate on a high level. This
communication allows the machine to better utilize the power
and torque the engine is producing. The net result is moving more
material. - Auto-Stall assists in quickly bringing the transmission to an
operating temperature at start-up when the machine is working in a
cold climate region. - Cat Payload Estimator for scrapers is an earthmoving solution for
optimal payload and jobsite efficiency. Payload Estimator achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Payload Estimator is optimized to be used with Sequence Assist, which provides increased productivity with less operator effort.
- Reduce up to 14 individual operator commands per cycle with
Sequence Assist (optional attachment). - Steer with less effort using the newly designed high-pressure
steering system. - Enjoy interior improvements and a more ergonomic work
environment with a 21% larger cab than the G Series cab. - Intuitive, ergonomic controls keep operators focused on their work.
- Maintain desired cab temperature with automatic temperature
control.
- Brakes are hydraulically actuated wet disc brakes for the tractor
and scraper. - Get in and out of the cab easier with the new powered access
ladder system (optional attachment). - Enhance an operator’s awareness of site surroundings with the
optional Work Area Vision System (WAVS). - Seat belt indicator provides visual and audible alerts when the seat
belt is not in use. - Ground level, engine shut-off switch stops all fuel to the engine
when activated and shuts down the machine. - Advanced Cushion Hitch allows the cushion hitch to prevent
end stroke by having the ability to predict end stroke events
and manage the rate of dampening, resulting in reduced hitch
maintenance and improved operator ride in rough conditions.
- The spacious cab features easy, intuitive controls and excellent
visibility. The cab provides a comfortable working environment for
all-day operation. - Cat Advanced Ride Management (ARM) seat suspension reduces
end stroke movement of the load cylinder for a smoother ride. - Engine overspeed protection will automatically engage with no
operator input when the machine is in eighth gear. The machine
will assist in slowing the machine speed by canceling the throttle
command and engaging the engine compression brake.
- Monitor, manage, and enhance jobsite operations.
- Hit target grade faster and more accurately with Cat GRADE technologies. Finish jobs in fewer passes and with less operator effort, saving you time and helping to increase profit.
- Product Link™ collects machine data that can be viewed online through web and mobile applications (optional attachment).
- Access information anytime, anywhere with Vision Link®– use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your jobsite.
- Shorten the learning curve for inexperienced operators with Load Assist (optional attachment).
- The new tractor hydraulic on-demand fan helps assist in lower fuel consumption.
- The Cat C13 tractor engine emits equivalent to U.S. EPA Tier 2 and EU Stage II and U.S. EPA Tier 3 and EU Stage IIIA, contributing to lower fuel .
- Using draft-arm overflow guards diverts material away from the bowl, preventing material from getting caught between the draft arms and the bowl sides.
- Cat Grade Control (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.
Engine
| Flywheel Power - Tractor/Scraper | 304 kW (407 hp) | |
| Rated Engine RPM | 2000 r/min | 2000 r/min |
| Engine Model | Cat C13 | |
| Flywheel Power - Tractor | 304 kW | 407 hp |
| Note | C13 engine emits equivalent to U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage III. |
Scraper Bowl
| Scraper Capacity - Heaped | 17.6 m³ | 23 yd³ |
Transmission
| Top Speed - Loaded | 53.9 km/h | 33.5 mile/h |
Dimensions
| Height - Overall Shipping | 4037 mm | 158.9 in |
| Length - Overall Machine | 13767 mm | 542 in |
| Width - Overall Machine | 3585 mm | 141.1 in |
| Height - Top of Cab | 3621 mm | 142.6 in |
| Height - Scraper Blade Maximum | 520 mm | 20.5 in |
| Width - Tractor | 3381 mm | 133.1 in |
| Width - Inside of Bowl | 3048 mm | 120 in |
| Width - Outside Rear Tires | 3275 mm | 128.9 in |
| Front of Tractor to Front Axle | 3119 mm | 122.8 in |
| Wheel Base | 8370 mm | 329.5 in |
| Rear Axle - Rear of Machine | 2278 mm | 89.7 in |
| Ground Clearance - Tractor | 557 mm | 21.9 in |
| Height - Top of Elevator | 3768 mm | 148.3 in |
| Width - Overall Machine - Ladder Down | 3790 mm | 149.2 in |
| Width - Rear Tire Centers | 2290 mm | 90.2 in |
| Axle to Vertical Hitch Pin | 432 mm | 17 in |
Service Refill Capacities
| Fuel Tank | 818 l | 216.09 gal (US) |
| Crankcase | 30.58 l | 8.08 gal (US) |
| Cooling System | 45 l | 11.89 gal (US) |
| Transmission System | 93 l | 24.76 gal (US) |
| Hydraulic System | 83 l | 21.926 gal (US) |
General
| Overall Length | 13.77 m | 45.18 ft |
| Maximum Depth of Spread | 465 mm | 18.3 in |
| Top Speed - Loaded | 53.9 km/h | 33.5 mile/h |
| Fuel Tank Refill Capacity - Scraper | 763 l | 201 gal (US) |
| Width - Cut | 3.14 m | 10.3 ft |
| Overall Width | 3.57 m | 11.71 ft |
| Number of Flights | 15 | |
| Tires - Scraper | 33.25R29**E3 | |
| Maximum Floor Opening | 1.34 m | 4.4 ft |
| Maximum Depth of Cut | 262 mm | 10.3 in |
| Elevator Flight Spacing | 520 mm | 20 in |
| Rated Load | 25 038 kg (55,200 lb); 25.1 tonnes (27.6 tons) | |
| Overall Shipping Height | 3.77 m | 12.37 ft |
| Scraper Capacity - Struck | 14.4 m³ | 18.8 yd³ |
| Tires - Tractor Drive | 33.25R29**E3 | |
| Scraper Capacity - Heaped | 17.6 m³ | 23 yd³ |
| 180° Curb-to-Curb Turning Width | 11.8 m | 38.71 ft |
| Operating Weight - Empty | 39937 kg | 88061 lb |
Cab
| Exterior Sound Level | The exterior sound power level for the standard machine (ISO 6393) is 111.5 dB(A). |
| ROPS/FOPS | Meets ISO standards |
Safety Criteria Compliance Standards
| Falling Object Protective Structure (FOPS) | ISO 3449:2005 Level II |
| Reverse Alarm | ISO 9533:2010 |
| Brakes | ISO 3450:2011 |
| Seat Belt | SAE J386:JUN1985 |
| Rollover Protection Structure (ROPS) | ISO 3471:2008 for up to 17 084 kg (37,664 lb) |
| Steering System | ISO 5010:2007 |
Travel Speeds - Runout
| Transmission Gear - Third | 12.1 km/h | 7.5 mile/h |
| Transmission Gear - Fifth | 21.9 km/h | 13.6 mile/h |
| Transmission Gear - Sixth | 29.6 km/h | 18.4 mile/h |
| Transmission Gear - Seventh | 39.9 km/h | 24.8 mile/h |
| Transmission Gear - First | 5 km/h | 3.1 mile/h |
| Transmission Gear - Fourth | 16.3 km/h | 10.1 mile/h |
| Transmission Gear - Reverse | 9.2 km/h | 5.7 mile/h |
| Transmission Gear - Eighth | 53.9 km/h | 33.5 mile/h |
| Transmission Gear - Second | 8.9 km/h | 5.5 mile/h |
Implement Cycle Times
| Ejector Extend | 6.45 s | 6.45 s |
| Bowl Lower | 3.5 s | 3.5 s |
| Bowl Raise | 3 s | 3 s |
| Ejector Retract | 9.7 s | 9.7 s |
360º Interior
360º Exterior
623 Wheel Tractor-Scraper
Call us
I am interested
I am interested
Thank you for contacting us.
We have received your request and will contact you as soon as possible.
Please check your email to ensure that the form has been sent correctly.