930M Small Wheel Loader

Units of measurement :

Metric

Imperial

Maximum Gross Power

125 kW

Operating Weight

14235 kg

Bucket Capacities

2.1-5.0 m3 (2.7-6.5 yd3)

Availability

Purchase Rental Used

The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.

Reduced By 30% Engine Speed

Lower engine speed lowers fuel burn.

MORE Control

More refined control with consistent and predictable stopping distances.

Class Leading 68 dB(A) Sound Level

When running at 1,600 RPM in Standard Mode.

Efficiently Powerful

Work Made Easy

Enjoy All Day Comfort

Customize Your Experience

Service

Customer Support

Sustainability

The Cat® C7.1 engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar's exclusive Intelligent Power Management system monitors operator input and power availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application.

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed.

STANDARD POWER MODE

Saves fuel and reduces cab sound levels
Biggest gains are seen during load and carry, snow removal and roading applications

PERFORMANCE POWER MODE

Enabled at the push of a button (HP+), boosts engine power by up to 10% and engine speed by over 12%
Increases hydraulic cycle times and productivity

Lock up and go with fully locking front differential axle that can be engaged on the move at full torque. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

930M Product Brochure.pdf 926M, 930M, 938M Product Brochure.pdf Small Wheel Loader Attachments Brochure.pdf Retrofit Options and Accessories for Small Wheel Loaders.pdf

Engine

Maximum Gross Power	125 kW	168 hp
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	116 kW	156 hp
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)	797 N·m	588 ft·lbf
Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)	170 mhp	170 mhp
Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4)	125 kW	168 hp
Displacement (Performance Power Mode: Speed Range 1-4)	7.01 l	427 in³
Note (2)	*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)	815 N·m	601 ft·lbf
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	158 mhp	158 mhp
Note (1)	Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*)	119 kW	160 hp
Engine Model	Cat C7.1**
Displacement (Standard Power Mode: Speed Range 1-3*)	7.01 l	427 in³
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)	777 N·m	573 ft·lbf
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)	122 kW	163 hp
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)	166 mhp	166 mhp
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)	795 N·m	586 ft·lbf
Note (3)	**The Cat C7.1 engine meets Tier 4 Final/Stage V off-highway emission standards.
Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)	162 mhp	162 mhp
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)	796 N·m	587 ft·lbf
Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)	122 kW	164 hp
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)	776 N·m	572 ft·lbf
Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	116 kW	156 hp

Weights

Buckets

Cab

Steering

Service Refill Capacities

Loader Hydraulic System

Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level	2.7 s	2.7 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift	5.7 s	5.7 s
Note (1)	*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure	26000 kPa	3771 psi
Maximum Working Pressure - Implement Pump	26000 kPa	3771 psi
Relief Pressure - Tilt Cylinder	28000 kPa	4061 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure	28000 kPa	4061 psi
Maximum Flow - Implement Pump - 4th Function Maximum Flow*	160 l/min	42 gal/min
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height	1.5 s	1.5 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift	5.1 s	5.1 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level	2.7 s	2.7 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time	10.1 s	10.1 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height	1.7 s	1.7 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time	9.3 s	9.3 s
Maximum Flow - Implement Pump	190 l/min	50 gal/min
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*	190 l/min	50 gal/min

Sound

Axles

Transmission

Tires

Air Conditioning System

Sustainability

Compatible products:

Other categories of Palas cargadoras de ruedas:

360º Interior
360º Exterior

930M Small Wheel Loader

Bucket Capacities	2.1-5.0 m3 (2.7-6.5 yd3)
Bucket Capacities - Light Material	3.1-5.0 m³ (4.0-6.5 yd³)
Bucket Capacities - General Purpose	2.1-2.7 m³ (2.7-3.5 yd³)

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level II
Note (2)	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)	*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed	2.4 s	2.4 s
Maximum Steering Torque - 40° (Full Turn)	37620 N·m	27747 ft·lbf
Maximum Flow - Steering Pump	130 l/min	34 gal/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	3.5 turns	3.5 turns
Maximum Working Pressure - Steering Pump	24130 kPa	3500 psi
Maximum Steering Torque - 0° (Straight Machine)	50375 N·m	37155 ft·lbf
Steering Articulation Angle - Each Direction	40°

Hydraulic System - Including Tank	165 l	43.6 gal (US)
Hydraulic Tank	90 l	23.8 gal (US)
Rear Axles	25 l	6.6 gal (US)
Transmission - Gear Box	8.5 l	2.2 gal (US)
Diesel Exhaust Fluid (DEF) Tank	19 l	5 gal (US)
Front Axles	26 l	6.9 gal (US)
Note	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Fuel Tank	195 l	51.5 gal (US)
Engine Crankcase	20 l	5.3 gal (US)
Cooling System	30 l	7.9 gal (US)

Note (1)	European Union Directive “2000/14/EC”
Operator Sound Pressure (ISO 6396:2008)	72 dB(A)	72 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	101 dB(A)	101 dB(A)

Rear	Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
Front	Fixed; Locking differential (standard)

Forward and Reverse - Range 1*	1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 4	40 km/h	25 mile/h
Forward and Reverse - Range 3	27 km/h	17 mile/h
Note	*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 2	13 km/h	8 mile/h

Note (3)	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)	Other tire choices are available. Contact your Cat dealer for details.
Note (2)	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Other Choices Include	20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 600/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires
Standard Size	20.5 R25, radial (L-3)

Detalle Productos Cat

930M Small Wheel Loader

Reduced By 30% Engine Speed

MORE Control

Class Leading 68 dB(A) Sound Level

Efficiently Powerful

Work Made Easy

Enjoy All Day Comfort

Customize Your Experience

Service

Customer Support

Sustainability

Engine

Weights

Buckets

Cab

Steering

Service Refill Capacities

Loader Hydraulic System

Sound

Axles

Transmission

Tires

Air Conditioning System

Sustainability

You might also be interested in:

926

926M

930

938

938M

Compatible products:

1566 mm (62 in)

1566 mm (62 in)

1566 mm (62 in)

2.5 m3 (3.3 yd3), Fusion™ Coupler

2.5 m3 (3.3 yd3), Fusion™ Coupler

2.7 m3 (3.5 yd3), Fusion™ Coupler

2.7 m3 (3.5 yd3), Fusion™ Coupler

3.0 m3 (3.9 yd3), Fusion™ Coupler, Bolt-On Cutting Edge

3.5 m3 (4.6 yd3), Fusion™ Coupler, Bolt-On Cutting Edge

3.66 m (12 ft)

3.66 m (12 ft)

3.66 m (12 ft)

3.66 m (12 ft)

3.8 m3 (5.0 yd3), Fusion™ Coupler, Bolt-On Cutting Edge

3.8 m3 (5.0 yd3), Pin On, Bolt-On Cutting Edge

4.26 m (14 ft)

4.26 m (14 ft)

4.26 m (14 ft)

4.26 m (14 ft)

4.2 m3 (5.5 yd3), Fusion™ Coupler, Bolt-On Cutting Edge

Other categories of Palas cargadoras de ruedas:

Compact Wheel Loaders

Medium Wheel Loaders

Large Wheel Loaders

360º Interior

360º Exterior