Detalle Productos Cat
14567864
Wheel Dozers
- Machines
- Wheeled tractors
- 844 Wheel Dozer
17411112
844 Wheel Dozer
Caterpillar
https://www.finanzauto.es/productos/tractores-de-ruedas-caterpillar-tractor-de-ruedas-844
Metric
Imperial
Engine Model
Cat® C27
Operating Weight
74883 kg
165089 lb
Net Power - SAE J1349:2011 - Standard Ambient
546 kW
732 hp
Availability
Maximize productivity in mining applications with the Cat® 844 Wheel Dozer, designed with efficiency in mind. Enhanced maintenance capabilities and simplified serviceability make for a long lifecycle, low owning and operating costs, and more uptime. Move more material with a machine built for the toughest conditions.

IMPROVED EFFICIENCY
Lock-up torque converter, combined with an on-demand cooling fan and advanced engine idle management, delivers a more smooth shiftENHANCED MAINTENANCE
Service access is conveniently located, helping to reduce maintenance timeADDITIONAL SAFETY
Grouped, ground level engine and machine controls allow for safe and easy daily maintenance
- The full box-section rear frame resists torsional shock and twisting forces.
- Solid through-width push beams transfer and absorb stresses through a larger portion of the frame.
- Robust structures withstand the toughest conditions and multiple lifecycles to help improve your bottom line.
- Resilient, durable blades are designed with excellent dozing and rolling characteristics.
- Optimized axle mounting helps result in increased structural integrity.
- Castings in the engine and frame are used in high stress areas to spread high loads.
- One-piece castings help enhance strength in key pin areas.

- Experience reliable efficiency with complete control over injection timing, duration, and pressure with Mechanically Actuated Electronic Unit Injection (MEUI™).
- World-class Cat planetary powershift transmission features consistent, smooth shifting and efficiency through integrated electronic controls.
- Extended engine life and improved fuel efficiency with reduced rated speed.
- Impeller Clutch Torque Converter (ICTC) and Rimpull Control System (RCS) help provide precise rimpull control.
- Load sensing hydraulic steering system enables precise machine control for easier loading.
- Lock-up torque converter with advanced control of lock-up speed.
- On demand cooling fan helps protect investment and helps lengthen lifecycle.

- Battery disconnect, emergency engine shutdown, and stairway light switch are accessed through the ground level power service center.
- Optional Cat Detect with Object Detection System (rearview camera and radar) or Vision (rearview camera) help increase operator awareness around the machine.
- Cab-mounted LED strobes provide warning for others near the machine.
- Wider stairs with reduced stair angles help increase safety for operators.
- Access stairs via a powered platform from cab or ground level and have emergency exit access.

- Integrated technologies assist with monitoring, managing, and enhancing your jobsite operations.
- Product Link™ remote monitoring helps provide valuable insight into machine or fleet performance through the VisionLink® interface, so you can make decisions that boost jobsite efficiency and lower operating costs.
- Vital Information Management System (VIMS™) touchscreen monitor gives access to a wide range of sensor information and enhanced machine data to resolve problems before machine failure.
- Optional Cat Detect technologies help enhance awareness of the environment around the machine for increased safety.

- Steering and Transmission Integrated Control System (STIC™) combines directional selection, gear selection, and steering into a single lever, helping to maximize responsiveness and control while reducing operator fatigue.
- Operators can easily enter and exit the cab with fold-up STIC steer/armrest, reduced access stairway angles, and standard stairway lighting.
- Experience reduced vibrations with isolated cab mounts and seat-mounted implement and steering controls.
- Reduced interior sound levels help keep operators comfortable throughout their entire shift.

- Meets U.S. EPA Tier 4 Final emissions standards or equivalent to U.S. EPA Tier 2.
- Automatic Engine Idle Shutdown helps conserve fuel when machine is not in use.
- Generate less waste with maintenance-free batteries.
- Maximize machine life and lower operating costs with Caterpillar Reman and Certified Rebuild programs, which utilize reused or remanufactured components for 40 to 70 percent cost savings.
- Retrofit packages from Caterpillar deliver new features to older machines to get the most from your investment.

- Swing-out fuel, hydraulic oil coolers, and condenser allow for easy access cleanout.
- Machine features ground level or platform access to easily reach daily service points.
- Swing-out doors on either side of the engine compartment help provide easy access to critical daily service checks.
- Optional tire pressure monitoring system provides real-time information to the operator in the cab for optimized tire life.
- Electronics bay is conveniently located inside the cab.
- Sight gauges offer quick visual inspection to help minimize fluid contamination.
- Lighting inside the engine compartment helps improve visibility to service points.
- Ecology drains help prevent spills and allow for easier service.
- 500-hour engine oil and filter change interval with S•O•S oil sampling analysis.
- Service center includes drain and fill, electronic technician connection, and fluid level status.
- Axle oil cooler and Automatic Retarder Control helps prevent unnecessary wear from accelerating down declines.

- Dependable blades are designed for mining with press rib construction and optimized widths and capacities for excellent dozing and rolling.
- Heavy-Duty Semi-U blade includes a Hardox 400 Liner plate, side plates, and additional reinforcements at the bottom of the blade.
- Equipped with the Cat MineStar System, a suite of integrated mine operations and mobile equipment technologies.
- Cat MineStar’s capabilities help manage all aspects of operation.
- Fleet provides remote machine tracking capabilities.
- Terrain for Loading helps enable high precision management of load management.
- Detect assists the operator with areas of limited visibility.
- Health delivers machine condition and operating data and diagnostic tools for a long machine lifecycle.
Engine
Engine Model | Cat® C27 | |
Net Power - SAE J1349:2011 - Standard Ambient | 546 kW | 732 hp |
Rated Speed | 1800 r/min | 1800 r/min |
Emissions | Option 1 - U.S. EPA Tier 4 Final / EU Stage V | |
Engine Power - ISO 14396:2002 | 586 kW | 786 hp |
Gross Power - SAE J1995:2014 | 597 kW | 801 hp |
Net Power - SAE J1349:2011 - High Ambient | 508 kW | 681 hp |
Emissions | Option 2 - China Nonroad Stage III emissions standards, equivalent to U.S. EPA Tier 2 | |
Engine Power - ISO 14396: 2002 | 561 kW | 752 hp |
Gross Power - SAE J1995:2014 | 571 kW | 766 hp |
Net Power - SAE J1349:2011 - Standard Ambient | 521 kW | 699 hp |
Net Power - SAE J1349:2011 - High Ambient | 483 kW | 648 hp |
Bore | 137.2 mm | 5.4 in |
Stroke | 152.4 mm | 6 in |
Displacement | 27.03 l | 1649.5 in³ |
Peak Torque - Speed | 3557 N·m | 2624 lb/ft |
Torque Rise | 18 % | 18 % |
Note | Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. |
Operating Specifications
Operating Weight | 74883 kg | 165089 lb |
Blade Capacity Range | 15.9 m³ | 20.8 yd³ |
Transmission
Transmission Type | Cat Planetary Power Shift | |
Converter Drive - Forward 1 | 7.3 km/h | 4.5 mile/h |
Converter Drive - Forward 2 | 13.3 km/h | 8.3 mile/h |
Converter Drive - Forward 3 | 22.9 km/h | 14.2 mile/h |
Converter Drive - Reverse 1 | 7.9 km/h | 4.9 mile/h |
Converter Drive - Reverse 2 | 14.7 km/h | 9.1 mile/h |
Converter Drive - Reverse 3 | 24.9 km/h | 15.5 mile/h |
Direct Drive - Forward 1 | Lock-up disabled | |
Direct Drive - Forward 2 | 13.7 km/h | 8.5 mile/h |
Direct Drive - Forward 3 | 24.5 km/h | 15.2 mile/h |
Direct Drive - Reverse 1 | 8.7 km/h | 5.4 mile/h |
Direct Drive - Reverse 2 | 15.4 km/h | 9.6 mile/h |
Direct Drive - Reverse 3 | 26.4 km/h | 16.4 mile/h |
Note | Travel speeds based on 45/65-45 L-5 46 ply tires. |
Hydraulic System - Lift/Tilt
Output at 2,000 rpm and 6900 kPa (1,000 psi) | 311 l/min | 82 gal/min |
Cylinders, Double Acting - Lift, Bore and Stroke | 133 mm × 1535 mm (5.25 in × 60.4 in) | |
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke | 210 mm × 188 mm (8.25 in × 7.4 in) | |
Relief Valve Setting - Bulldozer (Large Pump) | 18650 kPa | 2700 psi |
Relief Valve Setting - Tilt Cylinders (Small Pump) | 20150 kPa | 2920 psi |
Hydraulic System - Steering
Steering System - Circuit | Pilot, load sensing | |
Steering System - Pump | Piston, variable displacement | |
Minimum Turning Radius - Over Blade | 10369 mm | 34 ft |
Total Steering Angle | 35 ° | 35 ° |
Maximum Flow | 357 l/min | 94.3 gal/min |
Relief Valve Setting | 31000 kPa | 4500 psi |
Service Refill Capacities
Fuel Tank - Standard | 1085 l | 286.6 gal (US) |
Cooling System | 208 l | 54.9 gal (US) |
Crankcase | 76 l | 20 gal (US) |
Transmission | 110 l | 29.1 gal (US) |
Differential - Final Drives - Front | 271 l | 71.6 gal (US) |
Differential - Final Drives - Rear | 261 l | 68.9 gal (US) |
Hydraulic System - Implement and Hydraulic Fan | 261 l | 68.9 gal (US) |
Hydraulic System - Steering and Braking | 132 l | 34.9 gal (US) |
Air Conditioning System
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (3.9 lb) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.837 tons). |
Axles
Front | Fixed | |
Rear | Trunnion | |
Oscillation Angle | 8.5 ° | 8.5 ° |
Brakes
Brakes | Meets ISO 3540:2011 |
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008) | 72 dB(A) | 72 dB(A) |
Machine Sound Power Level (ISO 6395:2008) | 116 dB(A) | 116 dB(A) |
Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | 72 dB(A) |
Machine Sound Power Level (ISO 6395:2008)* | 114 dB(A) | 114 dB(A) |
Note (1) | *Sound suppression equipped | |
Note (2) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | |
Note (3) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | |
Note (4) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008) | 72 dB(A) | 72 dB(A) |
Machine Sound Power Level (ISO 6395:2008) | 116 dB(A) | 116 dB(A) |
Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | 72 dB(A) |
Machine Sound Power Level (ISO 6395:2008)* | 114 dB(A) | 114 dB(A) |
Note (1) | *Sound suppression equipped | |
Note (2) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | |
Note (3) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | |
Note (4) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
Cab
ROPS/FOPS | ISO 3471:2008 and ISO 3449:2005 Level II Standards |
Dimensions (Approximate)
Height - Top of ROPS | 5240 mm | 17.2 ft |
Height - Top of Exhaust Pipe | 5049 mm | 16.6 ft |
Height - Top of Hood | 3862 mm | 12.7 ft |
Ground Clearance | 596 mm | 2 ft |
Centerline of Front Axle to Hitch | 2300 mm | 7.5 ft |
Centerline of Rear Axle to Edge of Bumper | 3795 mm | 12.5 ft |
Wheel Base | 4600 mm | 15.1 ft |
Length - With Blade on Ground | 11120 mm | 36.5 ft |
You might also be interested in:
-
824
Engine Model
Cat® C15
Operating Weight – Straight Blade (Tier 4 Final/Stage V)
34004 kg
74966 lb
Net Power - SAE J1349:2011
302 kW
405 hp
Caterpillar
15195695
-
834
Engine Model
Cat® C18
Operating Weight
47750 kg
105271 lb
Net Power - SAE J1349:2011
370 kW
496 hp
Caterpillar
18347421
-
854
Engine Model
Cat C32B
Gross Power
676 kW
907 hp
Operating Weight
101898 kg
224647 lb
Caterpillar
15195749
Other categories of Equipos:
-
Mini Excavators
-
Small Excavators
-
Magni fixed telehandlers
-
Compact Wheel Loaders
-
Medium Excavators
-
Magni rotating telehandlers
-
Small Wheel Loaders
-
Large Excavators
-
Magni heavy duty telehandlers
-
Medium Wheel Loaders
-
Demolition Excavators
-
Large Wheel Loaders
-
Wheel Excavators
-
Chippers
-
Forestry forwarders
-
Underground Mining Equipment
-
Mobile stockpillers
-
Compactors
-
Landfill Compactors
-
Vibratory Soil Compactors
-
Soil Compactors
-
Screens
-
Scalper screens
-
Mobile Trommel screens
-
Underground Mining Trucks
-
Articulated Trucks
-
Mining Trucks
-
Off-Highway Trucks
-
Underground mining equipment
-
Long Reach Excavation
-
Excavators
-
Minig excavators
-
Asphalt Pavers
-
Track Asphalt Pavers
-
Wheel Asphalt Pavers
-
Cold Planers
-
Impact
-
Attachments
-
Mobile crushers and screeners
-
Jaws
-
Material Handlers
-
Track Material Handlers
-
Magni Telehandlers
-
Recycling Machines
-
Forestry machinery
-
Skid Steer Loaders
-
Tracked skid steer loaders
-
Wheeled skid steer loaders
-
Cone crusher
-
Motor Graders
-
Wheel Tractor-Scrapers
-
Elevating Scrapers
-
Track Loaders
-
Wheel Loaders
-
Forestry processors
-
Road Reclaimers
-
Backhoe Loaders
-
Tandem Vibratory Rollers
-
Crawler tractors
-
Mobile Shredders
-
High-Spedd Mobile Shredders
-
Low-Speed Mobile Shredders
-
Shredder vehicles
-
Windrow Turners
360º Interior
360º Exterior
844 Wheel Dozer
Call us
I am interested

I am interested
Thank you for contacting us.
We have received your request and will contact you as soon as possible.
Please check your email to ensure that the form has been sent correctly.