FLOW-SHARING VALVES
HIGH-ROTATION LINKAGE
C3.6 ENGINE
PARALLEL LIFT
LCD OPERATOR DISPLAY
A WIDE RANGE OF CAT ATTACHMENTS ARE AVAILABLE TO MEET THE NEEDS OF YOUR JOB SITE APPLICATIONS.
DAILY SERVICE POINTS
MACHINE SELECTION
Actively manage the flow of oil between each function of the machine. When the operator demands multiple operations the machine responds, providing smooth, effortless operation.
The Cat backhoe linkage provides an industry-leading 205 degrees of bucket rotation. This design helps with material retention when truck loading and with vertical wall-trenching. Improved performance and efficiency are achieved by the ability to do more with less movement.
The Cat C3.6 engine, which meets EU Stage V emission standards, reduces owning and operating costs while maintaining the same performance and power as the C4.4 engine. The aftertreatment is a compact, maintenance-free solution of DOC, SCR and DPF. The Cat C3.6 engine is a turbocharged in-line four-cylinder, four-stroke cycle with direct injection diesel engine. Cold starting capability down to –25˚C comes as standard with a cold starting package option allowing the machine to start down to –47˚C. This engine has a 12 volt starting motor with a 750 CCA maintenance-free battery. This engine gives up to 10% fuel savings, based upon application and machine setting, compared to the C4.4 engine.
Parallel lift loader arms offer excellent forward visibility and self-leveling, ensuring excellent material retention throughout the lift and lower cycles.
The LCD operator display comes standard as a softkey display or can be upgraded to touchscreen. Through the interactive display you can get updates on machine diagnostics and upcoming service intervals, as well as being able to configure various performance parameters dependent on configuration. This helps to match machine performance to operator preference further increasing productivity and efficiency. Optional machine security system is embedded into the display screen helping to keep your Cat backhoe loader secure.
Our attachments are engineered, balanced and tested to each Cat backhoe loader model, promising to minimize stress and optimize performance.
Caterpillar understands that the easier a task is the more likely it is to be done. We have ensured that servicing the Cat backhoe loader is as simple as it can be. All daily fluid check points and are easy to access from a large service platform.
Your dealer can help you with your machine purchase decision, based on your requirements and help keep operating costs to a minimum. Is the machine you have in mind exactly the best for your job, or could there be a more suitable solution?
Engine
| Power - Net |
68 kW |
92 hp |
| Power |
74.4 kW |
Weights
| Operating Weight - Nominal |
9170 kg |
20216 lb |
| Operating Weight - Maximum |
11500 kg |
25353 lb |
| Ride Control |
15 kg |
33 lb |
| Minimum Counterweight Recommendations - Extendible Stick: Loader Bucket - GP |
0 kg |
0 lb |
| Minimum Counterweight Recommendations - Standard Stick: Loader Bucket - GP |
0 kg |
0 lb |
| Air Conditioning |
32 kg |
71 lb |
| Extendible Stick - Excludes Front Counterweight |
203 kg |
448 lb |
| Counterweights - Base |
115 kg |
254 lb |
| Counterweights - Maximum |
115 kg |
254 lb |
| Minimum Counterweight Recommendations - Extendible Stick: Loader Bucket - MP |
0 kg |
0 lb |
| Operating Weight |
9170 kg |
20216 lb |
| MP Bucket (1.15 m3/1.50 yd3) - Without Fold-Over Forks |
776 kg |
1711 lb |
| Operating Weight - Maximum - ROPS Capacity |
11500 kg |
25353 lb |
| Auto-Shift Transmission |
109 kg |
240 lb |
| Minimum Counterweight Recommendations - Standard Stick: Loader Bucket - MP |
0 kg |
0 lb |
| MP Bucket (1.15 m3/1.50 yd3) - With Fold-Over Forks |
975 kg |
2150 lb |
| Total Gross Weight Not to Exceed |
11500 kg |
25353 lb |
| Note |
Machine Configuration – HRC 74.5 kW engine; standard stick hoe; standard cab with A/C; AWD standard shift transmission; 1.15 m3 MP loader bucket; 600 mm standard duty hoe bucket; 440/80R24 tires; no counterweight; 80 kg operator; full fuel tank. |
| Cab - ROPS/FOPS |
Standard |
Engine - EU Stage V (Standard)
| Net Torque - SAE J1349 |
436 N·m |
322 lb/ft |
| Displacement |
3.6 l |
220 in³ |
| Note (2) |
No derating required up to 3048 m altitude. Auto derate protects hydraulic and transmission systems. |
| Bore |
98 mm |
3.86 in |
| Note (1) |
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Torque Rise (net) |
48% @ 1,500 rpm |
| Stroke |
120 mm |
4.72 in |
| Emissions |
Meets EU Stage V emission standards. |
| Engine |
C3.6 74.4 kW Electronic Turbo Intercooled |
| Ratings at 2,200 rpm - Engine Power ISO 14396:2002 |
74 kW/101 hp |
| Net Power Rating @ 2,200 rpm - SAE J1349:2011 |
68 kW/92 hp |
| Note (3) |
Advertised power is tested per the specified standard in effect at the time of manufacture. |
| Ratings at 2,200 rpm - Gross Power SAE J1995:2014 |
76 kW/103 hp |
| Net Power Rating @ 2,200 rpm - ISO 9249:2007 |
68 kW/92 hp |
Backhoe Digging Depth
| Dig Depth |
4827 mm/5748 mm (E-Stick) |
Loader Performance
| Breakout Force |
60.7 kN |
13646 lbf |
Operator Station
| Controls |
Mechanical Loader; Mechanical Hoe (Pilot Hoe Optional) |
Transmission
| Note |
Travel speeds of backhoe loader at full throttle, when equipped with 440/80-28 rear tires. |
Transmission - Standard Shift Transmission (Standard)
| Forward - 4th |
40 km/h |
24.9 mile/h |
| Forward - 2nd |
9 km/h |
5.6 mile/h |
| Reverse - 1st |
6 km/h |
3.7 mile/h |
| Reverse - 3rd |
21 km/h |
13 mile/h |
| Reverse - 2nd |
9 km/h |
5.6 mile/h |
| Forward - 3rd |
21 km/h |
13 mile/h |
| Reverse - 4th |
40 km/h |
24.9 mile/h |
| Forward - 1st |
6 km/h |
3.7 mile/h |
Transmission - Powershift Transmission (Optional)
| Forward - 2nd |
10 km/h |
6.2 mile/h |
| Reverse - 3rd |
27 km/h |
16.8 mile/h |
| Forward - 4th |
40 km/h |
24.9 mile/h |
| Reverse - 2nd |
12 km/h |
7.5 mile/h |
| Reverse - 1st |
6 km/h |
3.7 mile/h |
| Forward - 3rd |
20 km/h |
12.4 mile/h |
| Forward - 1st |
6 km/h |
3.7 mile/h |
Transmission - Auto-Shift Transmission (Optional)
| Forward - 3rd |
12 km/h |
7.5 mile/h |
| Forward - 1st |
6 km/h |
3.7 mile/h |
| Forward - 2nd |
10 km/h |
6.2 mile/h |
| Forward - 6th |
40 km/h |
24.9 mile/h |
| Reverse - 1st |
6 km/h |
3.7 mile/h |
| Forward - 5th |
27 km/h |
16.8 mile/h |
| Forward - 4th |
20 km/h |
12.4 mile/h |
| Reverse - 3rd |
27 km/h |
16.8 mile/h |
| Reverse - 2nd |
12 km/h |
7.5 mile/h |
Transmission - Auto-Shift Transmission with Lock-Up Torque Converter (Optional)
| Forward - 6th |
40 km/h |
24.9 mile/h |
| Forward - 4th |
20 km/h |
12.4 mile/h |
| Reverse - 3rd |
27 km/h |
16.8 mile/h |
| Reverse - 1st |
6 km/h |
3.7 mile/h |
| Forward - 3rd |
12 km/h |
7.5 mile/h |
| Forward - 5th |
27 km/h |
16.8 mile/h |
| Forward - 1st |
6 km/h |
3.7 mile/h |
| Forward - 2nd |
10 km/h |
6.2 mile/h |
| Reverse - 2nd |
12 km/h |
7.5 mile/h |
Axle Ratings
| Rear Axle - Dynamic |
9186 kg |
20252 lb |
| Rear Axle - Static |
22964 kg |
50627 lb |
| Front Axle - Dynamic |
9186 kg |
20252 lb |
| Front Axle - Static |
22964 kg |
50627 lb |
Hydraulic System
| System Pressure - Loader |
250 bar |
3626 psi |
| System Pressure - Backhoe |
250 bar |
3626 psi |
| Pump Capacity @ 2,200 rpm |
160 l/min |
42.3 gal/min |
| Type |
Closed Center |
| Pump Type |
Variable-Flow, Axial Piston |
Steering
| AWD Cylinder, One (1) Double Acting - Rod Diameter |
42 mm |
1.7 in |
| AWD Cylinder, One (1) Double Acting - Stroke |
117 mm |
4.6 in |
| AWD Cylinder, One (1) Double Acting - Bore |
85 mm |
3.3 in |
| Turning Circle (28" Tires) - AWD (inner wheel not braked) - Outside Front Wheels |
9.8 m |
32.15 ft |
| Turning Circle (28" Tires) - AWD (inner wheel not braked) - Outside Widest Loader Bucket |
12.6 m |
41.34 ft |
| Type |
Front Wheel |
| Power Steering |
Hydrostatic |
Service Refill Capacities
| Rear Axle - Planetaries |
1.7 l |
0.4 gal (US) |
| Cooling System - A/C |
17.5 l |
4.6 gal (US) |
| Engine Oil - With Filter |
9 l |
2.4 gal (US) |
| Diesel Exhaust Fluid |
19 l |
5 gal (US) |
| Hydraulic Tank |
42 l |
11.1 gal (US) |
| Rear Axle |
16 l |
4.2 gal (US) |
| Fuel Tank |
160 l |
42.3 gal (US) |
| Hydraulic System |
95 l |
25.1 gal (US) |
| Front Axle - Planetaries |
1.7 l |
0.4 gal (US) |
| Front Axle |
14 l |
3.7 gal (US) |
Service Refills Capacities
| Transmission (Standard Shift) |
18 l |
4.8 gal (US) |
| Transmission (Powershift/Autoshift) |
19 l |
5 gal (US) |
.jpg)
