250 Skid Steer Loader

Unidades de medida :

Métrico

Imperial

Gross Power - SAE J1995

55 kW

Rated Operating Capacity

1220 kg

Operating Weight

3551 kg

Disponibilidad

Compra Alquiler Usada

Engine

Gross Power - SAE J1995	55 kW	74 hp
Net Power - SAE 1349	55 kW	73 hp
Displacement	2.8 l	171 in³
Stroke	110 mm	4.3 in
Bore	90 mm	3.5 in
Net Power - ISO 9249	55 kW	73 hp
Peak Torque - 1,600 rpm - SAE J1995	300 N·m	221 lb/ft
Note	Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Engine Model	Cat C2.8T (turbo)

Operating Specifications

Weights

Dimensions

Wheel Base	1094 mm	43.1 in
Height - Top of Cab	2080 mm	81.9 in
Vehicle Width over Tires	1677 mm	66 in
Ground Clearance	195 mm	7.7 in
Departure Angle	23°
Maximum Dump Angle	46°
Length - With Bucket on Ground	3430 mm	135 in
Length - Without Bucket	2800 mm	110.2 in
Bucket Pin Height - Maximum Lift	3150 mm	124 in
Maximum Reach - With Arms Parallel to Ground	833 mm	32.8 in
Turning Radius from Center - Coupler	1296 mm	51 in
Turning Radius from Center - Machine Rear	1649 mm	64.9 in
Maximum Overall Height	3957 mm	155.8 in
Bucket Pin Reach - Maximum Lift	75 mm	3 in
Bucket Pin Height - Carry Position	200 mm	7.9 in
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Rack Back Angle - Maximum Height	97°
Clearance at Maximum Lift and Dump	2443 mm	96.2 in
Turning Radius from Center - Bucket	2024 mm	79.7 in
Reach - Maximum Lift/Dump	448 mm	17.6 in
Roll Back Angle	28°

Rated Operating Capacity	1220 kg	2689 lb
Tipping Load	2440 kg	5378 lb
Breakout Force - Tilt Cylinder	3077 kg	6784 lb
Breakout Force - Lift Cylinder	2698 kg	5948 lb
Rated Operating Capacity with Optional Counterweight	1325 kg	2916 lb
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I
FOPS Level II	ISO 3449:2005 (Optional)

Chain Box - Each Side	8.3 l	2.2 gal (US)
Cooling System	11.5 l	3 gal (US)
Engine Crankcase	8 l	2.1 gal (US)
Fuel Tank	94.4 l	24.9 gal (US)
Hydraulic System	36.8 l	9.7 gal (US)
Hydraulic Tank	26 l	6.9 gal (US)

Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure	28000 kPa	4061 psi
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow	112 l/min	30 gal/min
Hydraulic Flow - Standard - Loader Hydraulic Flow	76 l/min	20 gal/min
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow	113 l/min	30 gal/min
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)	43 kW	58 hp
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	29 kW	39 hp
Hydraulic Flow - Standard - Loader Hydraulic Pressure	23000 kPa	3335 psi
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)	53 kW	71 hp
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure	23000 kPa	3335 psi

Travel Speed - Forward or Reverse - One Speed	12.9 km/h	8 mile/h
Travel Speed - Forward or Reverse - Two Speed Option	16.9 km/h	10.5 mile/h

250 Skid Steer Loader

Engine

Operating Specifications

Weights

Dimensions

Cab

Service Refill Capacities

Hydraulic System

Power Train

Sustainability

Noise Level

Air Conditioning System (if equipped)

También te puede interesar:

226D3

232D3

236D3

260

272D3

272D3 XE

Otras categorías de Minicargadoras:

Minicargadoras de cadenas

360º Interior

360º Exterior

Operating Weight	3551 kg	7829 lb
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Note (2)	*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Outside Cab**	101 dB(A)
Inside Cab*	83 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)	**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Detalle Productos Cat

250 Skid Steer Loader

Engine

Operating Specifications

Weights

Dimensions

Cab

Service Refill Capacities

Hydraulic System

Power Train

Sustainability

Noise Level

Air Conditioning System (if equipped)

También te puede interesar:

226D3

232D3

236D3

260

272D3

272D3 XE

Otras categorías de Minicargadoras:

Minicargadoras de cadenas

360º Interior

360º Exterior