260 Skid Steer Loader

Unidades de medida :

Métrico

Imperial

Gross Power - SAE J1995

55 kW

Rated Operating Capacity

1434 kg

Operating Weight

3866 kg

Disponibilidad

Compra Alquiler Usada

Engine

Gross Power - SAE J1995	55 kW	74 hp
Net Power - SAE 1349	55 kW	74 hp
Displacement	2.8 l	171 in³
Stroke	110 mm	4.3 in
Bore	90 mm	3.5 in
Note	Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Peak Torque - 1,600 rpm - SAE J1995	300 N·m	221 lb/ft
Net Power - ISO 9249	55 kW	73 hp
Engine Model	Cat C2.8T (turbo)

Operating Specifications

Weights

Dimensions

Wheel Base	1249 mm	49.2 in
Height - Top of Cab	2100 mm	81.9 in
Vehicle Width over Tires	1690 mm	66.5 in
Ground Clearance	201 mm	7.9 in
Departure Angle	23°
Maximum Dump Angle	46°
Bucket Pin Height - Maximum Lift	3365 mm	132.5 in
Bucket Pin Height - Carry Position	203 mm	8 in
Clearance at Maximum Lift and Dump	2646 mm	96.2 in
Maximum Overall Height	4160 mm	155.8 in
Length - With Bucket on Ground	3575 mm	135 in
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Turning Radius from Center - Bucket	2102 mm	82.7 in
Bucket Pin Reach - Maximum Lift	320 mm	12.6 in
Maximum Reach - With Arms Parallel to Ground	1120 mm	44.1 in
Length - Without Bucket	2956 mm	116.4 in
Reach - Maximum Lift/Dump	552 mm	21.7 in
Turning Radius from Center - Coupler	1367 mm	53.8 in
Turning Radius from Center - Machine Rear	1823 mm	71.8 in
Roll Back Angle	28°
Rack Back Angle - Maximum Height	97°

Rated Operating Capacity	1434 kg	3160 lb
Tipping Load	2867 kg	6321 lb
Breakout Force - Tilt Cylinder	4251 kg	9372 lb
Breakout Force - Lift Cylinder	3121 kg	5948 lb
Rated Operating Capacity with Optional Counterweight	1540 kg	3388 lb
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I
FOPS Level II	ISO 3449:2005 (Optional)

Chain Box - Each Side	9 l	2.4 gal (US)
Cooling System	11.5 l	3 gal (US)
Engine Crankcase	8 l	2.1 gal (US)
Fuel Tank	117.5 l	31 gal (US)
Hydraulic System	36.8 l	9.7 gal (US)
Hydraulic Tank	26 l	6.9 gal (US)

Hydraulic Flow - Standard - Loader Hydraulic Pressure	24130 kPa	3335 psi
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)	45.4 kW	58 hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow	129 l/min	34 gal/min
Hydraulic Flow - Standard - Loader Hydraulic Flow	86 l/min	20 gal/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow	113 l/min	30 gal/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure	24130 kPa	3500 psi
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure	28000 kPa	4061 psi
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)	60.2 kW	80.7 hp
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	34.6 kW	39 hp

Travel Speed - Forward or Reverse - One Speed	12.4 km/h	7.7 mile/h
Travel Speed - Forward or Reverse - Two Speed Option	17.9 km/h	11.1 mile/h

260 Skid Steer Loader

Engine

Operating Specifications

Weights

Dimensions

Cab

Service Refill Capacities

Hydraulic System

Power Train

Noise Level

Air Conditioning System (if equipped)

Sustainability

También te puede interesar:

226D3

232D3

236D3

250

272D3

272D3 XE

Otras categorías de Minicargadoras:

Minicargadoras de cadenas

360º Interior

360º Exterior

Operating Weight	3866 kg	8523 lb
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)	**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab*	83 dB(A)
Note (2)	*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Outside Cab**	101 dB(A)

Detalle Productos Cat

260 Skid Steer Loader

Engine

Operating Specifications

Weights

Dimensions

Cab

Service Refill Capacities

Hydraulic System

Power Train

Noise Level

Air Conditioning System (if equipped)

Sustainability

También te puede interesar:

226D3

232D3

236D3

250

272D3

272D3 XE

Otras categorías de Minicargadoras:

Minicargadoras de cadenas

360º Interior

360º Exterior